Hot Cutter Knife Tools Cutting PP/Polypropylene/Nylon Packaging Rope - RTH6011265 Rope

Rope, 1)MOQ 1pcs, 2)CE Certification, 3)Competitive Price, 4)Strict QC & timely delivery - details see: https://www.packinghere.com/hot-cutter-knife-tools-cutting-pp-polypropylene-nylon-packaging-rope-10029038
Material: PPType: Handle Rope,Hot KnifePlace of Origin: Jiangsu China (Mainland)Brand Name: Rongter Rope
Model Number: RTH6011265 RopeSpeed: AdjustableColor: GreenBlade material: Other
Handle material: PlasticApplication: Multi Functional KnifeMOQ: 1 piece/piecesSupply ability: 10000 pcs/ per month
Item name: Hot Cutter Knife Tools Cutting PP/Polypropylene/Nylon Packaging RopeKeywords: Rope  
Hot Cutter Knife Tools Cutting PP/Polypropylene/Nylon Packaging Rope RTH6011265 Rope
contact supplier for Hot Cutter Knife Tools Cutting PP/Polypropylene/Nylon Packaging Rope RTH6011265 Rope


Hot Cutter Knife Tools Cutting PP/Polypropylene/Nylon Packaging Rope

What is a Hot Knife?

The Hot Knife is a professional-grade hot cutting tool for foamed plastics. The Hot Knife heats up in seconds and gives the operator temperature control. Never before has working with foamed plastics been this easy, inexpensive and free of mess.

A hot knife is normally a hand-held tool with a handle and heated blade. Most hot knives are

designed for cutting EPS foam (Styrofoam), or a similar type of insulating foam.

Hot Knife Specification
TypeRTH8100RTH8500RTH6000
PowerMax 90WMax 190WMax 60W
Net Weight390g390g840g
Power Supply230V/50HZ230V/50HZ230V/50HZ
Blade Temperature6 seconds heated to 400°C6 seconds heated to 500°C6 seconds heated to 500°C
Power Cord Length3m3m3m
Boundary Dimension24×4.5×3.5cm24×4.5×3.5cm22×5×4.5cm
Toolbox Measurement28×23×8cm28×23×8cm28×23×8cm
Color(5 Choices)Red/Yellow/Blue/Green/Black
Safety CertificationCE Certification
Note

1. RTH8100 and RTH8500 are adjustable.

2. RTH6000 is non-adjustable.

What can it do?

The foam cutter/grooving cutter is fpr cutting different density foam, with fine cutting edge,no mess.

Cutting with the groover-sled, it is easy to make different groove shape on the foam.

Cut the rope and the webbing, with fine cutting edge, no disperse. Attached with the cutting foot, the hot knife cut thre synthetic fiber cloth without backup under the cloth, seal the cutting edge as well; cut the seal line on the bag. Especially good for cutting sail cloth, awnings and filter cloth.

For the best results,practiceon scrap pieces of foam.

When cutting foam it is best tokeep the temperature and speed consistent. If smoke develops during the cut, you are cutting too slow or the blade is to hot which could result in an oversized, uneven cut. This can be remedied by lowering the temperature and intermittently releasing the trigger during your cut. As the cutting resistance increases, depress the trigger again. The Hot Knife will reach the set temperature within seconds. You can accomplish your cut with minimal smoke using this process. Cutting in this manner will also prolong the life of the knife.

Releasing the trigger approximately one or two inches prior to the completion of the cut will help keep the blade clean and free from buildup.

Different Color Choice

Preparation

1. Select a hot knife blade corresponding to the cutting use.

2. Loosen the knurled nut when device is cold.

3. Insert each leg of the blade and tighten the knurled nuts. Make sure that the blade and the cutting head have optimal contact. If both legs of the blade are not properly installed, the unit will not heat up.

Cutting

1. Actuate switch, the indicator light and the blade will heat up.

2. Avoid direct short circuit between cutting heads.

3. Do not use metallic rulers for guiding the blade.

4. Clean cutting heads with enclosed wire brush.

5. Please make sure the blade is connected to the cutting material before blade heats up.

Caution

1. Always operate the Hot Knife in well ventilated space.

2. Never burn off the excess residue on the Hot Knife blade. The blades will over heated and be warped.

3. Only operate Hot Knife when it is in contact with the insulation board

4. Keep hot blades away from skin, clothing and other flammable materials.

5. Allow blades to cool before handling. Hot Knife may cause injury or burns to exposed surfaces.

6. If the temperature inside the tool is too high, the unit will get hot and the internal thermal protectors will turn it off, after it cool, the Hot Knife will operate again.

Select a suitable hot knife blade according to the cutting use.

The selected cutting blade should not be longer than 3/4” past the thickness of your foam board.

The foam cools the blade as it cuts. The exposed portion can overheat and cause your blade to warp.

The blade heat on a hot knife is generated from either a transformer or an electrical circuit board.

A quality hot knife can be manufactured using both technologies. One key to a quality hot knife is

the interchangeable blade. A good quality hot knife blade should be thin and have a sharpened edge

on the cutting side.

3 Kinds of Packaging

Assembly Line

1.Quality & Service:At Rongter, our #1 priority has always been providing our clients with great quality products and superior customer service.
2.Quick LeadTime:We're dedicated to providing the quickest turnaround times and work very Hard to ensure that all of your deadlines are met.
3.Unbeatable Prices:We continuously strive to find ways of reducing our production costs, and passing the savings over to you!
4.Brand Awareness:The goal of any strong brand is achieve a level of awareness that instills the idea of quality and value into all of your potential customers.
5.Special Offers:In order to maintain our competitive edge, we are constantly running special offers on our promotion gifts, consumer goods, and design services. Contact our sales team to see how we can help you save a lot of money.

CE Certification

Contact us

Add: 69 Chang’an Road, Wuzhong Zone, Suzhou City, Jiangsu Province, China

Zip: 215105

Tel: 0086 512 66520893 605

Fax: 0086 512 66520895

Mob: 0086 13218102598

0086 18862349027

Skype: rongter03

Http: www.rongter.com

http://rongter.en.alibaba.com

Packaging Detail:Rope 1)Plastic Toolbox Measurement: 28*23*8cm 2)2PCS/Carton: 29*18*25cm 3)5PCS/Carton: 42*29*25cm 4)10PCS/Carton: 42*29*50cm
Delivery Detail:Within 25 days after confirmation normal

Related Product for Hot Cutter Knife Tools Cutting PP/Polypropylene/Nylon Packaging Rope