Hot selling empty cosmetic tube - FLRG

empty cosmetic tube, 1. Diameter: 12.7-60mm, 2. Capacity: 5-500g, 3. Layer: 5 layers, 4. Certificate: COA - details see: https://www.packinghere.com/hot-selling-empty-cosmetic-tube-10008533

Material: Aluminum/Plastic,Aluminum-plastic compound/plastic/PE	Usage: Cosmetics	Cosmetic Type: Eye Cream	Surface Handling: Offset Printing
Place of Origin: Henan China (Mainland)	Brand Name: Xiaolong	Model Number: FLRG	Name: Empty cosmetic tube
Color: as you require	Packing: By cartons( Inner: plastic; Outer: Cartons)	Sealing: Aluminum foil sealing/Unsealed/One-time injection	Length: 43-210mm
Volume: 3-300ml	Printing tachnology: Offset printing	Cap: Screw cap, screw-on cap, flip top cap	Website: Http: www.ayflyy.com

Empty Cosmetic tube

1. Structure

Aluminum-plastic tube material (aluminum-plastic laminated tube) is composed of outer layer polyethylene (PE), bonding layer (EAA), aluminum foil, adhesive (EAA), inner polyethylene (PE), its structure as shown

2. Data

(1). Sheet total thickness: 250 um

(2). Aluminum foil thickness: 12 um

(3). Sheet gram weight: 254 g/m

3. Dimensional Deviation

(1). Thickness deviation: ±10 um

(2). Sheet gram weight deviation: ±10 g/cub

4. Machinery Performance

(1). Sheet peel strength: each layer peel strength≥6.0N/15mm

(2). Sheet tensile strength: vertical and horizontal tensile strength≥20.0Mpa

5.The characteristics of aluminum-plastic composite hose as following

(1). 5 layers composite, and the middle aluminum foil 12 u, sheet total thickness is 25u.
(2). Intermediate aluminum foil molecular structure very close, barrier performance is strong, can extend the shelf life.
(3). In the course of carriage, hose deformation, hand rub can bounce restorable.

(4). 1-6 colors, according to your request to printing tubes.

(5). (Heating pressure tail)sealing the tail, aluminum foil sealing, sharp-nosed tube , .one-time injection moulding tube.

The characteristics of aluminum tube as following

(1). Single hose, total thickness 10 u.
(2). Aluminum pipe internal must be inside spraying, otherwise easy to paste the pipe wall corrosion rot away.
(3). In the course of carriage, hose deformation, can't bounce restorable, thoroughly scraped

The characteristics of plastic tube as following

(1). 1, 2, 3, 5layers.

(2). Thickness: 20-30u

(3). The raw material of plastic tube is polyethylene, molecular structure is loose, easy permeability, easy penetration, products warranty short. Usually used in cosmetic packing.

(4). 1-4colors, not colored.

(5). High cost.

(6). In the course of carriage, can not be deformation.

(7). Sealing the tail: Heating pressure tail.

From the development trend of these tubes, aluminum-plastic composite have a bright market.

Our packing

Packaging Detail:Inner: plastic; Outer: Cartons

Delivery Detail:15 days after receive your payment